6

 

 

 

 

 

 

 

Playback with NETWORK features

Parental Lock

• If an update file is provided on the Pioneer website,

5

 

If ‘COMPLETE’ is displayed, updating is completed.

Set restrictions for using Internet services. Also set the

download it onto your computer. When downloading an

password accompanying the usage restrictions.

update file from the Pioneer website onto your computer,

 

 

The screen will return automatically to the play screen.

 

 

• If ‘FAIL’ is displayed on the front panel display,

• Upon shipment from the factory, the password is set to

the file will be in ZIP format. Unzip the ZIP file before saving

 

 

“0000”.

it on the USB memory device. If there are any old

 

 

updating has failed. Try the following:

1

 

 

 

downloaded files or downloaded files for other models on

 

 

- Turn the receiver’s power off, then turn it back on

Select ‘Network Configuration’ from the Network

the USB memory device, delete them.

 

 

and try updating the software again.

 

Setup menu.

 

Important

 

 

- Try disconnecting then reconnecting the USB device

 

 

 

 

 

 

 

or storing the update file again. If the error still

2 menu.Select ‘Parental Lock’ from the Network Configuration

• DO NOT unplug the power cord during updating.

 

 

 

 

occurs, try using a different USB memory device.

3

 

 

 

• Do not disconnect the USB memory device during

 

 

 

Input the password.

updating.

 

Factory Reset

 

Use / to select a character, / to set the position,

• Verify the software version of the receiver in the System

 

Use to reset all network connection settings to their initial,

 

and ENTER to confirm your selection.

Info menu before updating and confirm that the software

 

factory-setting condition.

4

 

 

 

in the USB memory device is a newer version.

 

 

 

Specify whether to turn Parental Lock on or off.

 

1 Select ‘Factory Reset’ from the Network Setup menu.

• Updating may reset the receiver’s settings to the initial,

 

 

• OFF – Internet services are not restricted.

factory-setting condition. Whether this is applicable to your

 

2

 

 

 

Select ‘Start’.

 

• ON – Internet services are restricted.

 

 

receiver can be confirmed at our Pioneer website.

 

5

 

 

 

 

 

3

Select ‘OK’ to confirm.

If you want to change the password, select ‘Change

 

Select ‘Firmware Update’ from the Network Setup

Password’.

1 menu.

 

 

The screen will return automatically to the play screen.

 

In this case, the procedure returns to step 3.

 

The receiver checks whether the USB memory device

 

 

 

 

 

 

System Information

 

 

 

 

 

 

 

 

 

 

 

inserted into the USB port on the receiver’s front panel

 

The setting status of the following network-related items can

Language

 

 

 

contains updatable software.

 

 

 

be checked.

Language can be set on the NETWORK function OSD screen.

2

 

 

To update, select ‘Start’.

 

• IP Address – Check the IP address of this receiver.

1

Select ‘Language’ from the Network Setup menu.

 

 

• MAC Address – Check the MAC address of this receiver.

3

 

 

When ‘Updating in progress, don’t unplug!’ is

 

 

 

 

• Release ID – Check the software version of this receiver.

 

 

 

displayed, select ‘OK’.

2 Select the language you want.

 

1

 

3

 

 

 

 

• If ‘File Not Found’ is displayed, try the following:

Select ‘System Info’ from the Network Setup menu.

When you’re finished, press RETURN.

 

 

- No update file was found on the USB memory

Display the setting status of the network-related items.

 

You return to the Network Setup menu.

 

device. Store the file in the USB memory device’s

2

 

 

 

 

 

 

When you’re finished, press RETURN.

 

 

 

 

 

root directory.

Firmware Update

 

 

- Try disconnecting then reconnecting the USB device

You return to the Network Setup menu.

Use this procedure to update the receiver’s software.

 

 

 

 

or storing the update file again. If the error still

 

 

 

Updating via a USB memory device is performed by

 

occurs, try using a different USB memory device.

 

 

 

downloading the update file from a computer, reading this file

4

 

 

 

 

The software update will start. Please wait.

 

 

 

onto a USB memory device then inserting this USB memory

 

 

 

device into the USB port on the receiver’s front panel. With

 

The OSD display will turn off during update and the words

 

 

 

this procedure, the USB memory device containing the

 

‘UPDATE’ will flash on the front panel.

 

 

 

update file must first be inserted into the USB port on the receiver’s front panel.

42