1 | Controls and displays |
14 iPod iPhone iPad/USB terminal
Use to connect your Apple iPod or USB mass storage device as an audio source (page 21).
24 DTS indicators
DTS – Lights when a source with DTS encoded audio signals is detected.
Removing the front cover
15 SOUND RETRIEVER AIR
HD – Lights when a source with
MCACC
5 V 2.1 A
VIDEO
When the button is pressed, the input switches to ADAPTER and the listening mode is automatically set to S.R AIR (page 31).
16 iPod iPhone iPad DIRECT CONTROL
Change the receiver’s input to the iPod and enable iPod operations on the iPod (page 28).
Display
17PHASE
Lights when the Phase Control is switched on (page 35).
18AUTO
Lights when the Auto Surround feature is switched on (page 33).
19 Tuner indicators
ST – Lights when a stereo FM broadcast is being received in auto stereo mode (page 32).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is registered or called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing the currently received AM/FM broadcast frequency.
20 Speaker indicators
Shows if the speaker system is on or not (page 14).
21 Sleep timer indicator
Lights when the receiver is in sleep mode (page 9).
22 PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type, etc.
23 Character display
Displays various system information.
encoded audio signals is detected.
ES – Lights to indicate
96/24 – Lights when a source with DTS 96/24 encoded audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is on, this lights to indicate NEO:6 processing (page 33).
25 Dolby Digital indicators
2D – Lights when a Dolby Digital encoded signal is detected.
2D+ – Lights when a source with Dolby Digital Plus encoded audio signals is detected.
2HD – Lights when a source with Dolby TrueHD encoded audio signals is detected.
EX – Lights to indicate Dolby Digital EX decoding.
2PLII(x) – Lights to indicate 2Pro Logic II/2Pro Logic IIx decoding. Light will go off during 2Pro Logic IIz decoding (see Listening in surround sound on page 33 for more on this).
26ADV.S.
Lights when one of the Advanced Surround modes has been selected (see Using the Advanced surround on page 34 for more on this).
27 SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected. Blinks when a digital audio signal is selected and selected audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks when an HDMI signal is selected and selected HDMI input is not provided.
28 Up Mix/DIMMER indicator
Lights when the Up Mix function is set to ON (page 35). Also, lights when DIMMER is set to off.
29DIR.
Lights when the DIRECT or PURE DIRECT mode is switched on (page 34).
SETUP MIC
iPod iPhone USB
iPad
Attaching the front cover
1
2 |
| USB |
MCACC | VIDEO | |
SETUP MIC |
iPod
iPhone
iPad
8