7 |
|
|
|
|
|
|
|
|
|
|
|
|
| Home Menu | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Resolution |
|
| Aspect |
|
|
| The Pre Out Setting | ||||||||
Specifies the output resolution of the video signal (when video |
| Specifies the aspect ratio when analog video input signals are |
| ||||||||||||
|
| Specify either using the surround back speaker or the front | |||||||||||||
input signals are output at the HDMI OUT terminal, select this |
| output at the HDMI OUT terminal. Make your desired settings |
| ||||||||||||
|
| height speaker connection with the PRE OUT SURR BACK/ | |||||||||||||
according to the resolution of your monitor and the images |
| while checking each setting on your display (if the image |
| ||||||||||||
|
| FRONT HEIGHT outputs. An additional amplifier is required | |||||||||||||
you wish to watch). |
|
| doesn’t match your monitor type, cropping or black bands |
| |||||||||||
|
|
| for the speaker connection. | ||||||||||||
• This setting is not applicable for video signals input via |
| appear). |
|
|
| ||||||||||
|
|
|
| • Default setting: Surr. Back | |||||||||||
HDMI. |
|
| 1 |
|
|
|
| ||||||||
|
| Select ‘Video Parameter’ from the Home Menu. |
| 1 |
|
|
|
| |||||||
1 |
|
|
|
|
| Select ‘Pre Out Setting’ from the Home Menu. | |||||||||
Select ‘Video Parameter’ from the Home Menu. | |||||||||||||||
|
| ||||||||||||||
|
|
|
| 2 Select ‘Aspect’ from the Video Parameter menu. |
|
| Home Menu |
| 4 . Pre Out Setting | ||||||
|
|
|
| ||||||||||||
2 Select ‘Resolution’ from the Video Parameter menu. |
|
| 5 . Video Parameter | 5c . Aspect |
| 1 | . Auto MCACC | Pre Out Surr. Back | |||||||
|
|
|
|
|
|
| DVD | NORMAL | 2 | . Manual | SP Setup | ||||
|
| 5 . Video Parameter | 5b . Resolution |
|
| a . Video Converter | 3 | . Input Assign |
| ||||||
|
|
|
|
|
| b . Resolution | SAT/CBL | [ THROUGH ] | 4 | . Pre Out | Setting | ||||
|
| a . Video Converter | Resolution AUTO |
|
| c . Aspect | FRONT VIDEO [ THROUGH ] | 5 | . HDMI Setup |
| |||||
|
| b . Resolution |
|
|
|
|
|
| 6 | . Auto Power | Down | ||||
|
| c . Aspect |
|
|
|
|
|
| 7 | . Network | Standby | ||||
|
|
|
|
|
|
|
|
| 8 | . FL Demo Mode | |||||
Return
Return | Return |
3 Select output resolution.
• AUTO – The resolution is selected automatically according to the capacity of the TV (monitor) connected by HDMI.
• PURE – The signals are output with the same resolution as when input.
• 480p/720p/1080i/1080p – The signal is output with the resolution specified here (480p means the resolution of 480p/576p).
4 When you’re finished, press RETURN. You return to the Video Parameter menu.
Note
•When set to a resolution with which the TV (monitor) is not compatible, no picture is output. Also, in some cases no picture will be output due to copyright protection signals. In this case, change the setting.
Return | Return |
3 Select desired output aspect ratio.
• THROUGH – The input video signal is output unchanged.
• NORMAL – Black bands will appear either at top and bottom or on both sides.
4 When you’re finished, press RETURN. You return to the Video Parameter menu.
Note
•If the image doesn’t match your monitor type, adjust the aspect ratio on the source component or on the monitor.
2 Select which speaker to connect to the PRE OUT SURR BACK/FRONT HEIGHT outputs using /.
•Surr. Back – Connect the surround back speaker.
•Height – Connect the front height speaker.
3 When you’re finished, press RETURN. You return to the Home Menu.
50