Pioneer VSX-9140TXH Operations on the Receiver and Cable Connections, Continue, Brand, Part NO

Operations on the Receiver and Cable Connections

Connect the receiver and the computer in order to display on the computer the various data measured on the receiver itself.

1 Connect the receiver to your PC with an RS-232C cable.

Caution

Before making or changing connections, switch off the power and disconnect the power cord from the power outlet. Plugging in components should be the last connection you make with your system.

RS-232C RS-232C

Female-female

cross cable

VSX-23TXH/VSX-21TXH/PC

VSX-9140TXH/VSX-9040TXH

Note

•When using a notebook computer or other computer without an RS-232C terminal, this application can be used by connecting the receiver via USB using a commercially available USB-RS-232C conversion cable (USB-Serial cable). When using USB connections, be sure to select the proper COM port number for data transmission (see page 9).

•The type of cable to use is a female-female cross cable. Different manufacturers use different names to refer to this type of cable. Sometimes it is called an “interlink” cable, and sometimes it is called a “reverse” cable.

Pin-out diagram of RS-232C cable to connect receiver and PC

Dsub 9-pin female Dsub 9-pin female

Dsub 9-pin female Dsub 9-pin female

• The following cable has been proved to ensure system operation.

Brand	Cable	Part NO.
Belkin	Pro Series Serial Direct Cable-10 feet	F3B207-10

Continue

7