Pioneer VSX-9110TXV-K Other Settings, The Other Setup menu, Multi-Roomand IR receiver setup

Other Settings 09

Input source	Input Terminals
	Digital	Component
VIDEO/GAME	(Fixed)	(Fixed)
HDMI 1
HDMI 2
XM
CD	OPT 3
CD-R/TAPE/MD
TUNER
MULTI CH IN
iPod

The Other Setup menu

The Other Setup menu is where you can make customized settings to reflect how you are using the receiver.

1Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use the buttons and ENTER to navigate through the

screens and select menu items. Press RETURN to confirm and exit the current menu.

2Select ‘Other Setup’ then press ENTER.

System Setup			7.Other Setup
	1.Auto	MCACC
				a.Multi Room Setup
	2.Surr	Back System		b.SR+	Setup
	3.Manual MCACC			b.OSD	Adjustment
	4.Data	Management
	5.Manual SP Setup
	6.Input	Setup
	7.Other	Setup
		: Exit			:Return

3 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

•Multi Room Setup – Specify your volume setting for a multi-room setup and your IR receiver type (see Multi-Room and IR receiver setup below).

•SR+ Setup – Specify how you want to control your Pioneer plasma display (see Multi-Room and IR receiver setup below).

•OSD Adjustment – Adjust the position of the on- screen display on your TV (see OSD Adjustment below).

4Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

Multi-Room and IR receiver setup

• Default setting: Variable / Setting 1

If you’ve made multi-room connections (see Multi-room listening on page 53) you may need to specify your volume setting. Also use this menu to specify your IR receiver type (if necessary).

1Select ‘Multi-Room’ from the System Setup menu.

7.Other Setup			7a.Multi Room		Setup
			Volume Level
	a.Multi Room Setup
	b.SR+	Setup				Variable
	b.OSD	Adjustment	IR	Setting	[ Setting 1 ]
			Be	careful of	loud
			volume when		"FIXED"
			is selected.
		:Return				:Finish

2Select the volume level setting.1

•Variable – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a pre-amp) and you will be using this receiver’s controls to adjust the volume.

•Fixed – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls. (This setting is not available if the surround back system setting is set to MR & S.)

With the Fixed setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub room at first and then experiment to find the correct level.

3Select the type of IR receiver you’re using.

•Setting 1 – Default setting.

•Setting 2 – Use this setting if the IR receiver you’re using doesn’t seem to work with Setting 1.2

4When you're finished, press RETURN.

You will return to the Other Setup menu.

SR+ Setup for Pioneer plasma displays

Make the following settings if you have connected a Pioneer plasma display to this receiver using an SR+ cable. Note that the number of function settings available will depend on the plasma display you’ve connected.

See also Using this receiver with a Pioneer plasma display on page 55 and Using the SR+ mode with a Pioneer plasma display on page 56.

Note

1If you selected MR&S in the Surround back speaker setting on page 35, you won’t be able to change the volume level.

2• Some IR receivers may not work with this receiver. Check with your audio dealer for more information.

• If the IR receiver setting is incorrect, SR control won’t be possible with this receiver.

59

En