04Controls and displays
Display
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 |
|
|
|
|
|
|
|
| 9 |
|
|
| 10 | 11 |
1 | DIG (digital) / ANA (analog) (page 29) |
| 11 Volume level indicator |
|
| ||
Indicates whether the current input source is analog or | Indicates the volume level in dB. |
| |||||
digital. |
|
|
|
|
|
| |
2 |
|
|
|
|
|
| |
Lights when the current input signal is 88.2/96 kHz digital.
3Sleep timer indicator (page 29) Lights when the sleep timer has been set.
4DIALOG indicator (page 24)
Lights when Dialog Enhancement is on
5 Input/output channel indicators
The letters L, C, R, LFE, Ls and Rs indicate the input channels coming into the receiver. The segments and SW (subwoofer) indicate the active speaker output channels.
6 VIR.SB indictor (page 24)
Lights when the Virtual Surround Back effect is on.
7OVER (page 32)
Lights when the input signal is too high, risking distortion. Use the input attenuator to reduce the level.
8Tuner indicators
STEREO (page 25)
Lights when listening to a stereo FM broadcast in auto/stereo mode.
TUNED
Lights when tuned to a broadcast.
MONO (page 25)
Lights when the tuner MPX mode is set to mono.
RDS (page 26)
Lights when listening to a station that is broadcasting RDS information.
RF ATT (page 25)
Lights when the RF attenuator is switched on.
9Character display
10EON indicators (page 28)
EON lights when EON is set. The dot indicator to the left lights when the current broadcast carries the EON data service.
18
En
