Pioneer VSX-C301 Connecting a satellite/cable receiver or other set-top box, English, Woofer

Connecting your equipment

Connecting a satellite/cable receiver or other set-top box

03

Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-called ‘set-top boxes’.

1Use a SCART cable to connect the STB IN AV connector to an AV connector on the set-top box component.

This carries video and analog stereo audio signals from the set-top box component to this receiver.

2Use an optical digital audio cable to connect the STB(DVD) OPT1 jack to an optical digital audio output on the set-top box component.

This connection carries stereo and multichannel digital audio.

If your set-top box component doesn’t have an optical digital audio out jack, it is possible to use a coaxial connection to the DVD(STB) COAX jack. However, since by default this input is assigned to the DVD input, you will need to reassign it to the STB input before you can use it. After connecting up everything else see Coaxial input setting on page 32 for how to do this.

•If your satellite/cable receiver doesn’t have a digital audio output, omit step 2 above.

English

					ANTENNA
					AM LOOP
		SPEAKERS				FMUNBAL75Ω			AC IN
	FRONT	CENTER	SURROUND				IN
R	L		R	L
								OUT
							CONTROL	VIDEO IN/OUT	DVR/TV IN/OUT
						DIGITAL IN			AV CONNECTOR
								DVD IN	STB IN
				SUB	STB	DVR/TV	DVD
				WOOFER	(DVD)		(STB)
				OUT	OPT1	OPT2	COAX

VSX-C301

DIGITAL OUT AV CONNECTOR OUT

STB

11

En