03Additional Information
Troubleshooting
•Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER autho- rized service center or your dealer to carry out repair work.
•If you are experiencing problems with the wireless speaker system, make sure to bring both the transmitter and the wireless speaker in for repair so that they can be tested properly.
Symptom | Cause & Remedy |
The power does not turn on. | • Make sure the supplied power cord (or AC adapter) is fully |
| inserted into the AC IN inlet (or DC IN inlet). |
| • Connect the power plug to the wall outlet. |
| • Disconnect the power plug from the outlet, and insert again. |
|
|
Audio is interrupted. | • This system uses high frequency radio waves that have |
| properties similar to light, such as linearity, reflection, refraction, |
| diffraction, and interference. Therefore, placement of the system |
| can result in weak radio waves and/or interruption. |
| • The distance between the transmitter and wireless speaker may |
| be too large. Use the wireless speaker within the reach of radio |
| wave from the transmitter. |
| • The system may be close to a location generating electrical |
| noise. If this is the case, find a location that does not affect the |
| sound adversely. |
Audio is suddenly interrupted. • There may be radio communication equipment using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven, operating nearby.
Audio cannot be received. | • The radio wave reception is variable depending on locations due |
| to the effects of obstacles and reflecting objects. Try changing |
| the location of the wireless speaker a little. |
| • The transmitter and wireless speaker are designed and sold as a |
| pair, and they identify each other in communication. This means |
| that communication is not available between separately |
| purchased transmitter and wireless speaker. |
|
|
Horizontal stripe noise inter- | • Is there a piece of A/V equipment with an antenna near the |
ference on a TV set near the | transmitter? If so, move the transmitter away from the antenna |
transmitter. | input terminal of the AV equipment. |
|
|
Caution
Static electricity or other external influence may cause malfunctioning of this unit. In this case, unplugging the power cord and then
14
En
