TROUBLESHOOTING
4.6.TROUBLESHOOTING CHARTS
4.6.1.FRYER TROUBLESHOOTING CHART
Problem | Probable Causes | Corrective Actions | |
| No power to appliance. | Check main building power supply. | |
| Controller not turned on. | Turn on controller. | |
Controller does | Power Cord loose or not | Connect power cord. | |
connected. | |||
not activate. |
| ||
Main circuit breaker to | Reset circuit breaker | ||
| |||
| appliance has tripped. | ||
|
| ||
| Appliance fuse has blown. | Contact Authorized Service Company. | |
| High temperature limit has | Allow appliance to cool and reset High | |
Controller is on | tripped. | temperature limit. | |
and appliance will | SCBS thermal limit switch has | Depress button on thermal limit switch to reset. If | |
not heat up. | problem continues, Contact Authorized Service | ||
| tripped. | Company. | |
|
| ||
Appliance will not | Faulty temperature probe. | Contact Authorized Service Company. | |
maintain |
|
| |
temperature | Faulty High temperature limit. | Contact Authorized Service Company. | |
properly. | |||
|
|
| |
Computer display |
|
| |
shows off and can | Faulty computer | Contact Authorized Service Company. | |
not be turned on. |
|
| |
|
|
|
4.6.2.FILTER TROUBLESHOOTING CHART (IF EQUIPPED)
Problem | Probable Causes | Corrective Actions | |
Filter pump does | Filter pump circuit breaker has | Reset circuit breaker. | |
not activate. | tripped. |
| |
Oil/shortening is | Dirty filter paper | Change filter paper. | |
returning to the | Strainer cap dirty | Remove strainer cap and clean. | |
tank slowly or not | Filter pan not pushed in | Push filter pan in. | |
at all. | completely. | ||
| |||
Excessive air | Pickup tube screen not tight. | Tighten pickup tube screen cap. | |
Pickup tube screen cap | Locate and install pickup tube screen cap. | ||
bubbles are in the | |||
missing | |||
oil being returned |
|
| |
Filter pan not pushed in |
| ||
to the tank. | Push filter pan in to complete connection. | ||
completely | |||
|
| ||
Drain valve is | Blue drain valve handle not | Verify that drain valve handle is completely | |
closed, but the | completely closed | closed. | |
computer |
|
| |
|
| ||
controller still | Improperly adjusted or | Contact Authorized Service Company. | |
displays | defective drain switch. | ||
| |||
“DRAINING” |
|
|
33 |
