RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

WARNING

The power supply to the appliance MUST be disconnected before performing

this procedure.

WARNING

Ensure that the gas supply to this appliance is turned off before performing

this procedure.

WARNING

Use only parts supplied with this kit. Use of any parts other than those

supplied with this kit will void the warranty and could cause unsafe conditions

or improper operation of your appliance.

WARNING

Drain the tank and ensure that appliance has cooled to room temperature before performing this upgrade. DO NOT work on a hot appliance or an appliance containing hot cooking medium; serious personal injury may occur.

TO THE PURCHASER

Post in a prominent location the instructions to be followed in the event that an operator smells gas. Obtain this information from your local gas supplier.

WARNING

There is an open flame inside this appliance. The unit may get hot enough to set nearby materials on fire. Keep the area around the appliance free from combustibles.

WARNING

DO NOT use an open flame to check for gas leaks!

WARNING

Adequate means must be provided to limit the movement of this appliance without depending on the gas line connection. If any restraining devices are disconnected during this procedure, ensure that they are reconnected before putting the appliance into service. Failure to do so could result in a dangerous and unsafe condition.

WARNING

Installation of this upgrade kit should only be performed by a competent service technician.

WARNING

Do not attempt to move a cooking appliance when the unit is at operating temperature. Serious personal injury could result if skin comes in contact with the hot surfaces.

WARNING

DO NOT sit or stand on this appliance. Serious injury could result from falling or contact with hot shortening/oil.

WARNING

Improper installation, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.

WARNING

If gas flow to appliance is interrupted, or pilots extinguish, wait 5 minutes before attempting to relight the pilot to allow any residual gas in appliance to dissipate.

NOTICE

It is recommended that your appliance be inspected by a qualified technician on a yearly basis.

L80-029 Rev 5 10/07

Page 2
Image 2
Pitco Frialator L80-029 installation instructions Retain These Instructions for Future Reference

L80-029 specifications

The Pitco Frialator L80-029 is a high-performance commercial deep fryer designed to meet the demanding needs of restaurants and food service establishments. With its robust construction and innovative design, the L80-029 is suited for frying a wide variety of foods, from French fries to chicken wings, ensuring consistent quality and temperature control.

One of the main features of the L80-029 is its efficient heating system which utilizes a set of powerful burners. These burners are designed to deliver high BTU output, allowing the fryer to reach optimal cooking temperatures quickly. This capability not only enhances cooking efficiency but also helps reduce oil absorption in foods, resulting in healthier fried products.

The L80-029 is equipped with a unique heating element that is positioned below the fry pot. This design minimizes cold spots and ensures even heating throughout the oil, leading to perfectly cooked items every time. This fryer also incorporates a reliable temperature control system that maintains precise frying temperatures, critical for achieving the desired texture and flavor in fried items.

Another significant characteristic of the Pitco L80-029 is its convenience and ease of use. The fryer comes with adjustable legs, making it simple to position in any kitchen layout. The front-mounted thermostat and easy-to-read indicators provide users with intuitive operation and oversight of the cooking process. This user-friendly design allows kitchen staff to operate the fryer effectively without extensive training.

Safety features are integral to the design of the L80-029. It includes a high-limit switch that prevents overheating and potential hazards, safeguarding both the equipment and operators. The fryer's stainless-steel construction not only enhances its durability but also simplifies cleaning and maintenance, ensuring a long lifespan even in the busiest of kitchens.

Furthermore, the Pitco Frialator L80-029 is designed with energy efficiency in mind. The efficient heat transfer and oil management technology help to reduce overall operating costs while maintaining high frying performance.

In summary, the Pitco Frialator L80-029 stands out in the commercial cooking equipment market due to its powerful heating system, ease of use, safety features, and energy-efficient design. These attributes make it a reliable choice for any kitchen looking to deliver high-quality fried foods efficiently and consistently.