
Job Presets • 3
Use the following procedure to choose (recall) a Job Preset.
1.With the MAIL RUN screen displayed, press the <JOB PRESETS> key. The PRESETS screen displays.
2.Enter the number (1 thru 9) of the desired Preset or press the 'Choose Preset' SoftKeyTM. If you entered the number, go to step 4; otherwise, go to step 3.
3.The screen prompts for the number of the Job Preset to choose. Enter the desired number.
4.Press <ENTER>. The system is set to the Job Preset and the MAIL RUN screen displays. If all the conditions of the Job Preset cannot be satisfied, the system sets up what it can and then displays the PRESET RECALL ERROR(S) screen with a list of the conditions it could not satisfy.
Job Preset Configuration TableYou can use the table on the following page to store the name and values of the different items for your Job Presets. You should make copies of the following page, complete the required information for each Job Preset, and place it in a location close to the system.
Remember that whenever the system is powered up it uses the values in Job Preset 1 to set up the system.