
Site Setup • 2
Site Setup
Site Setup SelectionsTo set up the PARAGONTM to meet your specific mailing demands, access the MAIL RUN screen, then select 'Site Setup'.
The SITE SETUP SCREEN displays the five selections listed below. For a description of the selections and procedures, turn to the appropriate section on one of the following pages.
•'Modify Site Setup'
•'Set Up Accounting' (If accounting is installed, see theData Trail Accounting Operating Guide for selections and procedures.)
•'Set Up Operator IDs' (if you have chosen to require operator
•'Set Default Class' or 'Set Default Acct./Class' (if accounting is installed)
•'Set Up Preferred Classes'
The flowchart below shows the sequence of screens and SoftKeysTM used to make your selection.
MAIL RUN 'Site Setup'
SITE SETUP 'Modify Site Setup'
'Set Up Accounting'
'Set Up Operator IDs'
'Set Default Acct./Class'
'Set Up Preferred Classes'
View or modify the system parameters
Set up or modify accounting parameters
Enable/Disable
Operator IDs
If enabled, you can add or delete operators and modify operator info
Specify a default account and/or class
Specify nine commonly used carrier/class combinations