Troubleshooting Procedures
The Planar D6015TM Series Medical Monitor was factory adjusted to standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. This monitor supports multiple VGA modes. Refer to the “Technical Information” on page 18 for a listing of the factory preset modes supported.
PROBLEM: No Signal Coming
When the monitor is ON and there is no video signal received, the following message will be displayed until the monitor enters
NO SIGNAL COMING…
CHECK SIGNAL CABLE
MONITOR WILL ENTER
POWER SAVING!!!!
Check to make sure the video cable is attached to the system. Refer to “PROBLEM: There is No LCD Display” for more information.
PROBLEM: Display is Unclear and Unstable
∙It is best to adjust the display using an image of vertical lines. In Windows, load a wallpaper bitmap that has vertical lines in it (or you can select the Windows
∙After you have the wallpaper loaded, open the OSD and select the “Clock” function. Repeatedly press the upper Adjustment button (
) until you see vertical dark and light lines across the screen.
∙When you can see distinct light and dark vertical bands, repeatedly press and release the lower Adjustment button ( 
) until the distinct bands disappear and you have a clear display.
∙Use the Function button (
or 
) to choose the “Phase” function to adjust the horizontal display. Repeatedly press and release the upper Adjustment button (
) and you will see horizontal dark and light lines appear.
∙When you can see distinct light and dark horizontal bands, repeatedly press and release the lower Adjustment button (
) until the distinct bands disappear and you have a clear display.
Operations Manual | 23 |
