3.Management with Web browser software
3.1Configuring and controlling the projector via a web browser (continued)
3.1.3 Network Settings
Displays and configures network settings.
|
| Item | Description | |
|
| |||
IP Configuration | Configures network settings. | |||
| DHCP ON | Enables DHCP. | ||
| DHCP OFF | Disables DHCP. | ||
|
| IP Address | Configures the IP address when DHCP is disabled. | |
|
| Subnet Mask | Configures the subnet mask when DHCP is disabled. | |
|
| Default Gateway | Configures the default gateway when DHCP is disabled. | |
|
|
| Configures the name of the projector. | |
Projector Name | The length of the Projector Name can be up to 64 | |||
alphanumeric characters. Only alphabets, numbers and | ||||
|
|
| following symbols can be used. | |
|
|
| [\]^_`{}~ and space | |
|
|
| Configures the location to be referred to when using SNMP. | |
sysLocation (SNMP) | The length of the sysLocation can be up to 255 alphanumeric | |||
characters. Only numbers | ||||
|
|
| ||
|
|
| be used. | |
|
|
| Configures the contact information to be referred to when | |
sysContact (SNMP) | using SNMP. | |||
The length of the sysContact can be up to 255 alphanumeric | ||||
|
|
| characters. Only numbers | |
|
|
| be used. | |
DNS Server Address | Configures the DNS server address. | |||
Click [Apply] button to save the settings.
NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
•If you connect the projector to an existing network, consult a network administrator before setting server addresses.
15
