3.Management with Web browser software
3.1Configuring and controlling the projector via a web browser (continued)
3.1.6 Alert Settings
Displays and configures failure & alert settings.
Alert Item | Description | |
|
| |
Cover Error | The lamp cover has not been properly fixed. | |
Fan Error | The cooling fan is not operating. | |
Lamp Error | The lamp does not light, and there is a possibility that interior | |
portion has become heated. | ||
| ||
Temp Error | There is a possibility that the interior portion has become | |
heated. | ||
| ||
Air Flow Error | The internal temperature is rising. | |
Lamp Time Error | Lamp time over. | |
Cold Error | There is a possibility that the interior portion has become | |
overcooled. | ||
| ||
Filter Error | Filter time over. | |
Other Error | Other error. | |
If displaying this error, please contact your dealer. | ||
| ||
Schedule Execution | Schedule Execution error. (20) | |
Error | ||
| ||
Lamp Time Alarm | Lamp time over Alarm Time setting. | |
Filter Time Alarm | Filter time over Alarm Time setting. | |
Transition Detector | Transition Detector Alarm. (OPTION Menu in the User’s | |
Alarm | Manual – Operating Guide) | |
“CHANGE THE LAMP” is | “CHANGE THE LAMP” is displayed. | |
displayed. |
| |
Cold Start | The Power switch is turned on. | |
(Off → standby mode) | ||
| ||
Authentication Failure | The SNMP access is detected from the invalid SNMP | |
community. | ||
|
Refer to “Troubleshooting” in the User’s Manual – Operating Guide for further detailed explanation of Error except Other Error and Schedule Execution Error.
18
