Planar PR9030 user manual E-mail Alerts, Mail Settings 17

3. Management with Web browser software

3.2 E-mail Alerts

The projector can automatically send an alert message to the specified e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error.

NOTE • Up to five e-mail addresses can be specified.

•The projector may be not able to send e-mail if the projector suddenly loses power.

Mail Settings (17)

To use the projector’s e-mail alert function, please configure the following items through a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click [Enable] check box to open the SMTP Port.

5)Click [Apply] button to save the settings.

NOTE • A Network Restart is required after the SMTP Port configuration settings have changed. Click [Network Restart] and configure the following items.

6)Click [Mail Settings] and configure each item. Refer to the item 3.1.5 Mail Settings (17) for further information.

7)Click [Apply] button to save the settings.

NOTE • Click [Send Test Mail] button in [Mail Settings] to confirm that the e-mail settings are correct. The following mail will be delivered to the specified addresses.

Subject line	:Test Mail	<Projector name>
Text	:Send Test Mail
	Date	<Testing date>
	Time	<Testing time>
	IP Address	<Projector IP address>
	MAC Address	<Projector MAC address>

32