Command Control via the Network | Planar PR9030 specs

3.Management with Web browser software

3.6Command Control via the Network (continued)

When the authentication setting is enabled, the following settings are required. (24)

7)Click [Security Settings] on the main menu.

8)Click [Network Control] and enter the desired authentication password.

*See NOTE.

9)Click [Apply] button to save the settings.

NOTE • The Authentication Password will be the same for Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715), and Image Transfer Port (Port: 9716).

•The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

41

Image 43

Planar PR9030 user manual Command Control via the Network

Contents

PR9030 LCD Projector Page Trademark acknowledgment Thank you for purchasing this projectorWeb control MY Image Still Image Transfer Display Management with Web browser software Content Main functionsEquipment connection and network setting Configuring and controlling the projector via a web browser MY Image Still image Transfer Display Configuring and controlling via a web browser Required equipment preparation Open Network Connections. .2.2.b Manual network connection settingNetwork settings Equipments connection Set IP address, subnet mask and default gateway for PC Manual network connection setting Setting automatically About IP address Setting manuallyFor example Click Internet Option setting Check connection 3.c Local Area Network LAN Settings window Mail Alerts Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Command Control via the Network Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon Password Dhcp Network Information Dhcp on Displays and configures network settingsDhcp OFF Displays and configures communication port settings Port SettingsClick Apply button to save the settings Displays and configures e-mail addressing settings Mail Settings Displays and configures failure & alert settings Alert SettingsPortion has become heated Alert Items are shown below Displays and configures schedule settings Schedule Settings Data  Schedule settings are shown belowDescription Schedule Date Month/Day Displays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Address Time differenceSntp Sntp Server IP Security Settings Snmp Configures the community name if Snmp is used Projector Control Hdmi Selects the 3D-YCS settingSelects the Hdmi setting 3D-YCS SRS WOW Is detected Displays the current projector status Projector Status Logoff When Logoff is clicked, the Logon menu is displayed. 13Network Restart Restarts the projector’s network connection Mail Alerts Mail Settings 17 Mail Alerts Snmp Settings 16 Projector Management using Snmp Event Scheduling Event Scheduling Schedule Settings 20 Date/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Command Control Settings 16 Command Control via the NetworkCommunication Port Command Control via the Network Send Data format Command FormatReply Error code Header Data length RS-232C command Check Sum Connection Reply Data format Automatic Connection Break Authentication Planar Systems, Inc