Planar PR9030 user manual The length of the subject line can be up to 100 alphanumeric

3.Management with Web browser software

3.1Configuring and controlling the projector via a web browser (continued)

The Alert Items are shown below.

Setting Item	Description
Alarm Time	Configures the time to alert.
	(Only Lamp Time Alarm and Filter Time Alarm.)
SNMP Trap	Click [Enable] check box to enable SNMP Trap alerts.
Send Mail	Click [Enable] check box to enable e-mail alerts.
	(Except Cold Start and Authentication Failure.)
	Configures the subject line of the e-mail to be sent.
Mail Subject	The length of the subject line can be up to 100 alphanumeric
	characters.
	(Except Cold Start and Authentication Failure.)
	Configures the text of the e-mail to be sent.
Mail Text	The length of the text can be up to 1024 alphanumeric
	characters.
	(Except Cold Start and Authentication Failure.)

Click [Apply] button to save the settings.

NOTE • The trigger of Filter Error e-mail is depending on the FILTER MESSAGE setting in the SERVICE item of the OPTION Menu which defines the period until the filter message is displayed on the projector screen. The e-mail will be sent when the filter timer exceeds 500, 1000, 1500 or 2000 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. (OPTION Menu in the User’s Manual – Operating Guide)

•Lamp Time Alarm is defined as a threshold for e-mail notification (reminder) of the lamp timer. When the lamp hour exceeds this threshold that is configured through the Web page, the e-mail will be sent out.

•Filter Time Alarm is defined as a threshold for e-mail notification (reminder) of the filter timer. When the filter hour exceeds this threshold, the e-mail will be sent out.

19