QUICK LINKS

Contents

Index

Ordering Parts

Product Information

Regulatory Compliance

Warranty

GETTING STARTED

About the Display

Unpack Display

Identify Components

INSTALLING THE DISPLAY

Connect Power

Connect Video

Connect Audio

Connect Touch Screen

Power Management System

USING THE CONTROLS

Display Controls

OSD Menu

Function Menus

OSD Lockout

DDC Change

APPENDIXES

Technical Information

Troubleshooting

Product Information

Safety instructions

Store the display in its original shipping carton when it is not in operation for extended periods of time. Use the original packing materials and carton when shipping the display.

Do not place the display near a window. Exposing the display to rain, water, moisture, or direct sunlight can damage it.

Do not place anything on top of the video cable. Place the cable clear of foot traffic.

Do not apply excessive pressure to the screen. Excessive pressure may cause permanent damage to the display.

Refer all servicing to qualified personnel to maintain your warranty. The display and power adapter units contain no user-serviceable parts.

Do not cover or obstruct the venting holes on the back of the display.

Make sure the display storage area has a temperature range between -20 and 65 degrees Celsius. Storing your display outside this range could result in permanent damage.

Do not expose the display to liquid or drop it. If the case has been damaged, the unit

may pose a shock or fire hazard. Unplug the unit immediately and call customer support for assistance.

Replace any cord or cable that is frayed or damaged with another of the same type and rating as supplied by Planar. The safety and regulatory listings and certifications are based on the cable supplied by Planar.

Use only the power adapter that has been tested and approved for use with this display product. The power adapter must be plugged into a grounded power outlet.

Do not use the power adapter near inflammable anesthetics.

Do not immerse the power adapter in liquid, or a safety hazard could arise during use.

Disconnect the display from the mains by pulling the mains power cord/mains plug.

Install the display near a wall outlet that is easily accessible.

MORE

VS15 Display

vi

Page 6
Image 6
Planar VS15XAD-TR warranty Product Information, Safety instructions