3.5 WAN

3.5.1 WAN Interface

ADSL 2/2+ Router provide 8 PVCs with different channel mode. You can select the Bridge / MER / PPPoE / PPPoA mode for your environment.

Bridge Mode

The device can be configured to act as a bridging device between your LAN and your ISP. Bridges are devices that enable 2 or more networks to communicate as if they are 2 segments of the same physical LAN.

ADSL 2/2+ Router is bridge mode enabled by factory default.

1.Open the WEB page in “WAN Æ WAN Interface”.

2.Select the Channel Mode to “1483 Bridged”. Set the parameters VPI / VCI and Encapsulation mode according to the ISP provided.

3.Click “Add” button to add this channel into VC table. You can use the “Modify” and “Delete” button to manage your PVC.

4.Go to “Admin Æ Commit/Reboot” menu, clink “Commit and Reboot” button. The device will reboot and apply this setting.

Note: “Commit and Reboot”: Whenever you use the web console to change system settings, the changes are initially placed in temporary storage. To save your changes for future use, you need to use the commit function. This function saves your changes from RAM to flash memory and then reboot the system.

38