3.6.8 IPSec VPN (ADW-4401 only)

The IPSec VPN (Virtual Private Network) feature in the ADW-4401v4 allows you to create a VPN connection between 2 ADW-4401v4. It is easy to configure and share the resource between two-sites through a secure and safe connection.

IPSec VPN Configuration

„VPN: Enable or Disable IPSec VPN

„Connection Name: Each IPSec VPN is given a unique name to identify it.

„Local public IP Address: The address of the local VPN endpoint.

„Remote public IP Address: The address of the remote VPN endpoint.

„Local private IP Address: IP address or subnet on your local LAN. Traffic must be from (or to) these addresses to be covered by this policy. For example, the 192.168.1.0/24 is for a class C subnet.

„Remote private IP Address: IP address or subnet on the remote LAN. Traffic must be to (or from) these addresses to be covered by this policy. For example, the 192.168.1.0/24 is for a class C subnet.

„PSK Key (Pre-shared Key): The key must be entered both here and on the remote VPN Gateway.

56