IPSec VPN Example

In this example, 2 LANs are connected via IPSec VPN. Each end has an ADW-4401v4.

Note

•The LANs MUST use different IP address ranges.

•Both endpoints have fixed WAN (Internet) IP addresses.

IPSec Settings of ADW-4401 Site A:

Step 1. Enable the VPN, it needs to take several minutes. Step 2. Enter a Name for this connection.

Step 3. Enter the Local public IP as “203.73.50.242”.

Step 4. Enter the Remote public IP as “61.62.236.12”. (ADW-4401-B WAN IP) Step 5. Enter the Local private IP as “192.168.1.0/24”.

Step 6. Enter the Remote private IP as “192.168.10.0/24”. (Site B Subnet) Step 7. Enter the PSK Key as “123456789”, it must match with ADW-4401-B. Step 8. Click “Add” to add this VPN connection.

Step 9. Click “listen” to wait remote site for connection.

57