3.6.4 Routing

You have two ways to manage the device’s routing information. It includes RIP and Static Route.

3.6.4.1 RIP

Enable the RIP if you are using this device as a RIP-enabled router to communicate with others using the Routing Information Protocol. This page is used to select the interfaces on your devices that use RIP, and the version of the protocol used.

To activate RIP for the device, select the “Enabled” radio button for RIP Mode and click “Apply Changes” to apply it.

To configure an individual interface, select the Interface, desired RIP version and Send mode. Click the “Add” button to save the configuration, and to start or stop RIP based on the Global RIP mode selected.

51