Admin Privilege
43
Reset to Factory Default The Reset to Factory Default page allows you to reset the modem to original factory
default configuration (factory.reg).
Click this link; system will perform diagnostic tests automatically. And show the testing
result in Diagnostic Test page. If some of the tests fail, related help links are available
for reference while troubleshooting.
Figure 6-11: Diagnostic Test Result Screen
The Code Image Update page allows you to upgrade the image code locally. Browse
the location of firmware file, and click the Upload to start the update.
The Network Code Image Update page allows user to upgrade the image code from
remote FTP server.
Assume an FTP server stores the updated image on Internet. Click Image Download
to initiate the updating. To set up the ftp server IP address, please save the
UpdateHost parameter under [Class\ Service\System] in the config.reg file as the IP
address of the specific Ftp server on Internet.
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com