Planet Technology ISW-800M 2.1.4 Reset Button, 2.1.5DIP Switches

	Off	No device attached
	Yellow	The port is operating in full-duplex mode.
FDX/COL
	Blinks	Collision of Packets occurs in the port.
(Port 7 & 8)
	Off	The port in half-duplex mode or no device attached

2.1.4 Reset Button

The reset button provides user a quick and easy way to restart and set the configuration back to default value.

。Restart: press the button for 2 seconds and release.

。Set to factory default value: press the button for 5 seconds and release. The switch will set all configurations back to default setting.

2.1.5DIP Switches

The switch provides the 9 DIP-switch for configuring the relay alarm operation mode and the ring master operation mode. The default value of Dipswitch is OFF.

DIP Switch No	Status	Description
	OFF	Disable port 1 Alarm
1
	ON	Enable port 1 Alarm. If the port’s link fails, the fault LED will
		light up.
	OFF	Disable port 2 Alarm
2
	ON	Enable port 2 Alarm. If the port’s link fails, the fault LED will
		light up.
	OFF	Disable port 3 Alarm
3
	ON	Enable por 3 t Alarm. If the port’s link fails, the fault LED will
		light up.
	OFF	Disable port 4 Alarm
4
	ON	Enable port 4 Alarm. If the port’s link fails, the fault LED will
		light up.
	OFF	Disable port 5 Alarm
5
	ON	Enable port 5 Alarm. If the port’s link fails, the fault LED will
		light up.