7.To set the outgoing frames are VLAN-Tagged frames or untagged. Then click .

Tag: outgoing frames with VLAN-Tagged.

Untag: outgoing frames without VLAN-Tagged.

4.10.2.2Port VID: Configure port VID settings

1.Port VLAN ID: enter the port VLAN ID.

2.Click .

3.To reset back to default value, click button.

802.1q VLAN - Port VLAN ID interface

[NOTE] Remember to execute the "Save Configuration" action, otherwise the new configuration will lose when the switch power off.

4.11 Alert

There are three kinds of alert - e-mail, event, and power alarm. You can configure each alert function, as you needed.

4.11.1 E-mail Alert Configuration

When the specific events occur, the system will send the alert to the email account that is assigned by