Planet Technology ISW-800M 4.26.2 Event Configuration

System Log Configuration

4.26.2 Event Configuration

You can select the system log events. When selected events occur, the system will send out the log information. Also, per port log events can be selected.

■System event selection: 4 selections - Device cold start, Power status, SNMP Authentication Failure, and Redundant ring topology change. Mark the checkbox to select the event. When selected events occur, the system will produce the logs.

¾Device cold start: when the device executes cold start action, the system will produce a log message.

¾Power status: when the device power status has changed, the system will produce a log message.

¾SNMP Authentication Failure: when the SNMP authentication fails, the system will produce a log message.

¾Redundant Ring topology change: when the redundant ring topology has changed, the system will produce a log message.

■Port event selection: select the per port events. Per port has 3 selections - Link UP, Link Down, and Link UP & Link Down. Disable means no event is selected.

¾Link UP: the system will produce a log message when port connection is up only.

¾Link Down: the system will produce a log message when port connection is down only.

¾Link UP & Link Down: the system will produce a log message when port connection is up and down.

■After selected, click .