Planet Technology ISW-800M 2.1.6 Switch Bottom Panel, 2.1.7 Wiring the Power Inputs

	OFF	Disable port 6 Alarm
6
	ON	Enable port 6 Alarm. If the port’s link fails, the fault LED will
		light up.
	OFF	Disable port 7 Alarm
7
	ON	Enable port 7 Alarm. If the port’s link fails, the fault LED will
		light up.
	OFF	Disable port 8 Alarm
8
	ON	Enable port 8 Alarm. If the port’s link fails, the fault LED will
		light up.
	OFF	Disable the ring master function.
9
	ON	Enable the switch as the ring master in the redundant ring
		group.

[NOTE]

1.When port alarm function is enabled, the fault LED will on and Alarm relay will activity when port failure occurs.

2.Please restart the switch after the Redundant ring DIPswitch is set.

2.1.6 Switch Bottom Panel

The bottom panel of the ISW-800M consists one terminal block connector within two DC power inputs and one DC IN power jack for extra AC/DC power adapter.

Figure 2-2 shows the bottom panel of the switch

Figure 2-2ISW-800M Bottom Panel.

2.1.7 Wiring the Power Inputs

Please follow below steps to insert the power wire.