Settings contain the following parameters:

Save Config

Click on the “mlrd.cfg” hyperlink to save the current configuration into local computer. This configuration file can be used for debugging purpose as well as cloning settings to all other devices.

Restore Config

Select the proper configuration to be restored. Press the “Browse” button to select the correct file to be restored. After this, Press the “Upload” button to upload the selected file. This action will override current configuration. Please use with caution.

Install New Webserver Certificate

Select the proper certificate to be uploaded to the internal web server. Failing to do so may cause the web server to stop running. Always use a tested web server certificate for this purpose.

Access Control

From WAN Interface

Check or uncheck the checkbox to allow or ban access for configuration purposes from WAN interface.

From VPN Interface

Check or uncheck the checkbox to allow or ban access for configuration purposes from VPN interface.

From Network

Check or uncheck the checkbox to allow or ban access for configuration purposes from Network.

Subnet

Allow this network address for configuration access.

Netmask

Network mask for the subnet configured above.

“Save Config” button

27