The status bar located at the bottom of the AP Finder is displaying the status of the scanning process. While the –Select Adapter- drop down list, allow user to choose the adapter to configure the nodes. Two options are available: MLRD Manager or Web-based Configuration Page.
4.2.2 Trap Viewer
The trap viewer is used to catch the alarm or trap send from the MAP-2105, which have their trap destination IP Address set to the user’s IP Address. In the MLRD Management Suite, user can switch between the AP Finder and Trap Viewer by selecting the tab at the left bottom corner. Alternatively, this can be done by choosing View > AP Finder or View > Trap Viewer to toggle between the pages.
The following figure display the layout of the Trap Viewer.
40
