The MAP-2105 should connect to the network that provide DHCP services (the first time installation) In this guide, we will base on XRT-401D (Internet Broadband Router) as the example for DHCP server, switch and router, this installation can vary on the network planning.
The MAP-2105 should be installed in the same subnet to the Mesh Gateway for optimal performance.
| | | | | The MAP-2105 is optimized for 500-user registration; however, the overall |
| | | | Note | network performance may vary on the real environment and application in |
| | | | many aspects, such as the bandwidth to the Internet, the services / sessions |
| | | | |
| | | | | that the clients implement. |
| | | | | |
1.4 Hardware Installation
1.Using Category 3 or higher UTP or STP cable, connect the WAN port of MAP-2105 to a 10Mbps or 10/100Mbps Ethernet hub or switch, and connect the management station to a hub or switch on the same LAN.
2.Connect the power adapter to the receptor on MAP-2105 and plug the other end to a wall outlet or power strip.
| | | | | ONLY use the power adapter supplied with the MAP-2105. Otherwise, the |
| | | | Note | product may be damaged. |
| | | | | |
1.5 Startup the MAP-2105
To get the first management of the MAP-2105, please follow the following steps.
1.Connect the MAP-2105’s WAN port to the network where can provide the DHCP services. For example, connect to the LAN port of XRT-401D.
2.Power on a PC that also connects to the LAN port of the XRT-401D with DHCP or fixed IP address.
3.Open the Internet browser and go to the DHCP status page of XRT-401D to check the WAN IP address of the MAP-2105.
WAN MAC Address of
MAP-2105
4.Check the MAC address from the Web page and also the MAC address label of the MAP- 2105. For example, 09-64as the figure above.
5.Key in the IP address you found for MAP-2105 with “https://”. For example:
2
