Planet Technology WAP-4035 Parameter, Description

Parameter	Description
Mode	Shows the current operation mode.
Band	2.4GHz (B): It forces the WAP-4035 to operate in 802.11b only.
	2.4GHz (G): It forces the WAP-4035 to operate in 802.11g only.
	2.4GHz (B+G): It allows the WAP-4035 to operate in 802.11b and 802.11g
	simultaneously.
ESSID	The ESSID (up to 32 printable ASCII characters) is the unique name identified in a
	WLAN. The ID prevents the unintentional merging of two co-located WLANs.
	Please make sure that the ESSID of all stations in the same WLAN network are the
	same. The default value is “default”.
Channel Number	Select the appropriate channel from the list provided to correspond with your
	network settings. Channels differ from country to country.
	Channel 1-11 (North America)
	Channel 1-14 (Japan)
	Channel 1-13 (Europe)
Associated Clients	You may press “Show Active Clients” button to check the connected client
	information. After the button pressed, you will see the dialog box as below.

You may press “Refresh” to get the new client table or “Close” to close this dialog

box.

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen below to prompt you the settings are save successfully. If you press “Continue”, you can proceed to configure other settings. However, the new configurations are not take effect at this time. You must click “Apply”, and then the WAP-4035 will restart with new configuration. You may check the LED status to make sure WAP-4035 finishes the restart.

13