the coverage. Please check the specification of the antenna you want to use, and make sure it can be used on WAP-4035.
4.WLAN Type
If WAP-4035 is installed in an 802.11b and 802.11g mixed WLAN, its performance will be reduced significantly. Because every 802.11g OFDM packet needs to be preceded by an RTS-CTS or CTS packet exchange that can be recognized by legacy 802.11b devices. This additional overhead lowers the speed. If there are no 802.11b devices connected, or if connections to all 802.11b devices are denied so that WAP-4035 can operate in 11g-only mode, then its data rate should actually 54Mbps.
1.5Reset Button
WAP-4035 provides a Reset button on the rear panel for user to restart or set WAP-4035 configuration to factory default.
Time | Active |
Press less than 5 Sec. | WAP-4035 will re-boot itself, keeping your original configurations |
| |
Press more than 5 Sec. | WAP-4035 will reset itself to the factory default settings |
| |