Web-based configuration

1.3LED Indicators

LED

Color

Function

PWR

Green

Off: Power is not connected

 

 

On: Device is ready

 

 

Blink: During boot up procedure

 

 

 

WLAN

Orange

Off: Wireless LAN is no function

 

 

Blink: Transmitting or receiving data through the Wireless LAN

 

 

 

10/100M

Green

Off: LAN is connected to 10Mbps device

 

 

On: LAN is connected to 100Mbps device

 

 

 

LNK/ACT

Green

Off: LAN is not connected

 

 

On: LAN is connected

 

 

Blink: Transmitting or receiving data through the LAN

 

 

 

1.4Wireless Performance

The following information will help you utilizing the wireless performance and operating coverage of WAP-4035.

1.Site selection

To avoid interferences, please locate WAP-4035 and wireless client away from transformers, microwave ovens, heavy-duty motors, fluorescent lights and other industrial equipments. Keep the number of walls or ceilings between AP and clients as few as possible. Otherwise the signal strength may be seriously reduced. Place WAP-4035 in an open space or add additional WAP-4035 as needed to improve the coverage.

2.Environmental factors

The wireless network is easily affected by many environment factors. Every environment is unique with different obstacles, construction materials, weather, etc. It is hard to determine the exact operation rage of WAP-4035 in a specific location without testing.

3.Antenna adjustment

The bundle antenna of WAP-4035 is adjustable. Firstly install the antenna pointing straight up, then smoothly adjust it if the radio signal strength is poor. But the signal reception is definitely weak in some certain areas, such as location right down the antenna.

Moreover, the original antenna of WAP-4035 can be replaced with other external antennas to extend

8