You can view the spanning tree information about Root Bridge. The screen is shown as below:

Figure 5-35Root Bridge Information Web Page screen

The following parameter can be configured of per port, after you setup completed. Please click “Apply” button to modify.

Figure 5-36Configure Spanning Tree Parameters of each port Web Page screen

Please refer to Table 5-2 for per port Spanning Tree Parameters detail description.

Parameter

Description

 

 

Port Priority

Allow to set port priority of per port. The priority range is 0 to 255.

 

 

Path Cost

Allow to set port cost of per port. The path cost range is 1 to 65535

 

 

Table 5-2Per port Spanning Tree Parameters detail description You can view spanning tree status about the Switch. The screen is shown as below:

Figure 5-37STP Port Status Web Page screen

You can click” Help” button; the following screen in Figure 5-38appears.

- 72 -