I. PREPARATION OF VEHICLE INTERIOR
1.Remove the O.E.M. console mounted to inner roof of vehicle. Remove and discard (1) one screw from recess in front of console near rear view mirror. Disconnect wire harness and
remove console from vehicle. Use care not to
damage A/C control head. See Figure 1.
FIGURE 1
2.Remove A/C control head from cloth covered trim ring on O.E M. console by depressing (4) four tabs on back of control assembly.
See Figure 2. Discard cloth covered trim ring.
FIGURE 3
3
FIGURE 2
3.Remove and discard O.E.M. dome light by removing center cover and (2) two screws. Disconnect wire harness. See Figure 3.
4.Carefully remove and retain bezel from rear A/C control head and lay it in a safe place. See Fig. 3.
5.Remove and retain rear A/C control head and lay it in a safe place. See Figure 3.
