9. If vehicle is equipped with an electronic compass, unsnap the wire harness clip and relocate toward center of vehicle. See Figure 7.
FIGURE 7
10.Remove and retain the (2) two door scuff plates on driver’s side. See Figure 8.
FIGURE 8
11.Remove and retain the handle which mounts to the top of the “B” pillar. See Figure 9.
12.Unsnap the cover from upper and lower mounting bracket for the seat belt. Remove and retain TORX head bolt and bracket. Carefully pull panel away from side of vehicle. Unsnap upper door trim from headliner and lay aside. See Figure 9.
FIGURE 9
5
