Setup
Hooking up the base
1. Remove the QuickTips card from under the base.
. Plug the AC power adapter into the bottom of the Calisto base, and then plug it into an available wall outlet.
3. Route the AC power adapter cable under the cable holder as shown.
4.Plug one end of the telephone cable into the Calisto base and the other end into an available wall telephone jack. If needed, use the splitter included to share the wall jack with another device.*
5.Route the phone line cable under the cable holder as shown.
6.To use the VoIP capability, plug smaller end of the USB cable into the Calisto base and the other end into an available USB port on your computer.
7.Insert the Calisto Pro Series
*For use with a
Completed system
Page