Plantronics 655 manual Using the Handset with the Charging Base

Using the Handset with the Charging Base

Locating the handset from the charging base

Press the handset locator button on the charging base. The handset rings. After you have located the handset, press any button to stop the ringing.

Press here

Note: The handset will not ring if it is out of range or if the battery has run out of charge.

Registering your handset with the charging base

Your handset comes pre-registered with the base. If the handset screen displays “Searching for base” even when the handset is on the base and the AC power adapter and phone cord are properly connected, follow these steps to re-register the handset with the base.

1. On the main screen, press Menu (left soft key).

. Use the navigator to scroll down and highlight

Initial Setup, and press Select (right soft key).

3.Highlight Headset/Base, and press Select

(right soft key).

4.Highlight Register to Base, and press Select (right soft key).

5.While the handset is in registration mode, press the handset

locator button on the charging base until the screen shows registration is successful.

Page 40