Using the PerSonoCall VoIP Utility
1. Connect your computer to the bottom of the charging base using the USB cable. The smaller end of the cable goes into the base; the larger end goes into a USB port on your computer.
. Make sure your computer VoIP call software (Skype or Yahoo! Voice) is running.
Note: If you have several USB ports on your computer, we recommend you always use the same one to connect Calisto.
3. Do one of the following:
–To place a call: Place the call as you normally do using your VoIP software. Your handset screen displays “Calling Internet.”
Tip: You must dial calls from the VoIP software on your computer; you cannot dial VoIP calls from the handset.
–To receive a call: When a VoIP call arrives, the handset has a distinctive VoIP ring and your handset screen displays “Internet Incoming Call.” Answer the call as you normally would using the handset, speakerphone, or headset (see “Receiving calls” on page 9).
–To end a call: End a VoIP call in the same way you normally would using the handset or the headset (see “Ending calls” on page 11).
Tip: When you are on a VoIP call, you can talk as you normally would from the handset, or transfer the call between the handset, speakerphone, and headset (see “Switching calls between handset, headset, and speakerphone” on page 10).
Page 39
