ADJUSTING VOLUME, INITIATING FLASH | TRAVELLING WITH |
Gently push | Disassembled unit |
|
|
to disassemble |
|
Rock the headset volume control back and forth to adjust listening volume.
To adjust the listen or speak volume of the softphone, please refer to the softphone user documentation.
To adjust the listen or speak volume of the audio device on the computer, use the Sound and Audio Devices section on the control panel in Windows®.
To initiate the flash function (see page 11 “To switch between calls”), rock the volume control to either side for more than 2 seconds.
MUTING A CALL,
INITIATING SMART BUTTON
You have the option to easily disassemble the
To conserve headset power and to comply with air travel regulations, you should turn off the headset by simultaneously pressing both the call control button and listening volume/ mute button for 5 seconds. When the green talk indicator light on headset blinks, release both buttons.
To turn headset back on, press the call control button. The talk indicator light will quickly flash green.
To mute headset, briefly press the listening volume/mute button straight in. Press again to unmute.
You will hear 3 rapid beeps every 15 seconds to indicate mute is on.
To initiate the smart button, press and hold the listening volume/mute button for more than 2 seconds.
NOTE: Once turned off, a single press on any button will turn the headset back on. Beware that if not stowed properly, the
12
0
130