97654438 E
Page 31
WARNING
To prevent personal injury, you must have the assistance of a second
person to help roll the LF 6602 up the ramp.
When the LF 6602 is being rolled up the ramp, ensure that the unit is
tilted no more than 10 degrees in the vertical position. The LF 6602
weighs more than 181 kg (400 lbs). If the unit is tilted more than 10
degrees, it can topple over, causing personal injury.
7) After the LF 6602 is positioned on the pallet, remove the ramp.
8) Press in on that part of the frame (on the front) which is angled out and re-install the bolts.
9) Tighten the two bolts on the front of the frame.
10) Latch and lock the LF 6602's rear door.
11) Re-install the wood support, the two brackets and the four screws on each bracket on the
front of the frame. With the #2 cross recess screwdriver, tighten the four screws.
12) Tighten the two bolts on the back of the frame.
13) Re-install new banding straps around the unit, placing the plastic pieces on the corners.
14) Place the protective bag over the LF 6602.
15) Position the foam cushion and ramp on top of the LF 6602. Place the shipping carton
over the foam cushion, the ramp and the unit.
16) Re-install new banding straps around the shipping carton, placing the plastic pieces on
the corners.