2) Manually move the shuttle to the home position as shown below.
EP006039
Manually Moving the Shuttle Assembly to the Home Position
3) Remove the cartridge from the shuttle slot.
MEDIA LOADING
Individual media cartridges can be selected for loading by host command or by the autoload configuration option. The host can select and load a media cartridge from any shuttle slot by issuing an appropriate SCSI bus command.
Selection by the autoload configuration option occurs at initial power up and when the LOAD/MENU switch on the DOC is pressed while the LF 6600 is in Operating mode. Depending on the setting of the autoload option, the LF 6600 automatically inserts and loads one specified media cartridge or the most recently used (MRU) cartridge or moves the shuttle to the home position.
If the selected cartridge is not present, the DOC displays "# Empty", where # represents cartridges
For more information on viewing and setting drive configuration options, refer to the Configuration Mode section of this manual.
PLASMON LASER MAGNETIC STORAGE - LF 6602 USER MANUAL
Page 82
