Plasmon MOD 910 user manual Scsi Identifier, General Precautions for MOD910E

User Manual

SCSI Identifier

Each device on a SCSI bus requires a unique address to be set which maybe in the range of 0 to 6 as address 7 is usually reserved for the host computer address. The MOD910 is shipped with a default address of 1 which will usually suffice in most cases.

Please refer to diagram on Appendix C

General Precautions for MOD910E

✗Never plug or un-plug any connectors or cables from the device on the SCSI bus whilst power is applied to either host computer or any devices attached.

✗Do not use the unit under the following operating environments:

Places with high humidity Exposed to direct sunlight

Locations subject to excessive shock or vibration

✗Do not cover ventilation slots as these are provided for cooling.

✗Do not place the drive near a printer.

✗Never attempt to disassemble the unit.

✗Never touch the surface of a recordable disk.

✗Do not allow any foreign object or liquid to enter the unit.

✓Always remove the disk before moving the unit. This will ensure that the optical head is securely positioned for shipping.

✓Keep the packaging material should the unit have to be transported.

6 97705183 A