PLUS Vision Data Projector user manual Operating, E-23, Switch on the projector power

Power Cable Connections and Switching the Power On/Off

There is an order in which the power cable is connected and the power is switched on/off.

Operating

1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.

The POWER indicator will light in amber, and the unit will enter the standby mode. Lit amber

	POWER				POWER
POWER		SOURCE			STATUS
STATUS	AUTO
		MENU
				+
			SELECT	CANCEL	Firmly plug in all the way.
		-
			ENTER	ACCESS

To wall outlet

OUT

RGB

AUDIO

VIDEO

S- VIDEO

2 Switch on the projector power

Projector operation: Press the POWER button.

Remote control operation: Press the POWER ON button.

		Lit amber	Flashes green	Lit green
			(Approximately 60 seconds)	Power is on
ON	POWER	OFF
		POWER	POWER	POWER
		STATUS	STATUS	STATUS

This indicator is also lit green in Eco-mode.

The first time the power is switched on after purchase, [Menu Language Select] will be displayed. See Page E-24 for information about language selection.

•When the power is switched on, the POWER indicator changes to flashing green, then lights steadily after about 60 seconds and the projection screen is set to the brightness of normal mode. At this time, if the STATUS indicator is lit in green, [Lamp Mode] is set to "Eco". See Pages E-30 and E-49 for information about the selection method.

•If the power does not come on, see "When the STATLIS Indicator is Lit or Flashing" on Page E-59.

•Your own logo can be projected at the time of startup. See "Startup Logo Creation" on Page E-57.

The projector is now capable of regular projection.

3 Switch on the power of the connected equipment

Note:

•When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached easily.

•Press the POWER button or the POWER ON button after the POWER indicator is lit in amber.

E-23