PLUS Vision Data Projector Using the Quick Menu, Content of Adjustments and Settings, E-34, play

General Operation

Using the Quick Menu

(1)

This function permits frequently used adjustments to be performed quickly.

Note that the Quick Menu will not be displayed unless the signal of the connected equipment is input. Please select the input that you wish to adjust.

Main unit operation

(1)	Press the SELECT ￿ or ￿ button to display the quick ad-
	justment display.
	Make further presses to switch to the desired adjustment dis-
	play.
(2)	Press the SELECT ￿ or ￿ button to adjust.

(2)

MENU

SELECT

(3) To close the display immediately, press the CANCEL but-

ton.

In the absence of operations for a period of about 10 sec-

onds, the display will close automatically.

Remote control operation

(1)A press of the QUICK MENU button brings up the quick adjustment display.

Further presses cause the adjustment display to change in sequence.

The adjustment display can be selected with use of either the SELECT ￿ or ￿ button.

(2)Press the cursor ￿ or ￿ button to make the adjustment. Pressing the "+" or "-" button will also switch the adjustment display.

(3)To close the display immediately, press the CANCEL but- ton.

In the absence of operations for a period of about 10 sec- onds, the display will close automatically.

ENTER		CANCEL
	(3)
		(3)
QUICK	ASPECT	AUTO

(1)

MENU CANCEL

(2)	ENTER
TIMER	KSTN
ZOOM	VOL

(2)

Content of Adjustments and Settings

Example: Brightness adjustment display

Brightness0

Display Item
	Adjustment/Setting
Brightness	Adjusts the brightness of the image. See page E-42.
Contrast	Adjusts the contrast of the image. See page E-42.
Keystone	Corrects (vertical) keystone distortion of the screen. See page E-32.
Volume	This function adjusts the volume of the built-in speaker. See page E-32.
Presentation timer	Sets the time of the presentation timer. See page E-31.

E-34