PLUS Vision Data Projector user manual Connections with Component Signals, E-20

Connecting Personal Computers and Video Equipment

Connections with Component Signals

When the Video Equipment Has a YCbCr Connector or YPbPr Connector

•Make connections to the RGB connector of the projector using a component cable, which is available separately.

•The projector has been set to "Auto" at the factory; however, if it does not project, please change the input setting to "Compo- nent" using the menu sequence of [Setup] → [Input Format] → [RGB].

See "Input Format" on Page E-49.

•This projector automatically distinguishes the YCbCr input signal and the YPbPr input signal and projects it.

When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or another color, change the setting under the menu of [Color] → [Color Space].

See "Color Space" on Page E-45.

•Press the RGB button for input selection using the remote control.

Component cable (Available as an option)

Order code: 28-690

Green

Blue

Red

Y Cb Cr

COMPONENT

DVI

COMPONENT

Y Pb Pr

Green

Blue

Red

Component cable (Available as an option)

Order code: 28-690

E-20