E – 12
The Procedure Up to Projecting to the Screen
DVI-D
COMPONENT
CTRL
S-VIDEOVIDEOY Cb Cr
POWER
ON OFF
P
O
W
E
R
/
S
T
A
T
U
S
O
N
/
S
T
A
N
D
B
Y
A
S
P
E
C
T
S
O
U
R
C
E
1
2
3
4
759
8
6
Note:
*Please purchase a commercially available screen separately.
*A cable (commercially available), which is available separately,
is required for connections with the DVI-D connector of the
personal computer.
*A cable (commercially available), which is available separately,
is required to connect a DVD player with the YCbCr connec-
tors.
*Please refer to the various manuals of the audio system for
information about audio system connections.
Position the projector → Page E-13 "Projection Distance and Screen Size "
Determine the locations to place the screen and the projector.
Connecting the power cord → Page E-14 "Power Cord Connections"
Connect the video equipment and personal computer
Connect your equipment to the projector.
→ Page E-15 "Connections with VIDEO and S-VIDEO Connectors"
→ Page E-16 "Connections with Y, Cb, and Cr Connectors (COMPONENT)"
→ Page E-17 "Connections with DVI-D Connector"
Switching on the main power → Page E-18 "Turning ON or OFF Main Power"
Switching on the power → Page E-18 "Turning ON or OFF Power"
Properly adjust the projection image to the screen → Page E-19 "Projection Screen Position Adjustment"
Focusing → Page E-19 "Focus Adjustment"
Selecting input equipment → Page E-20, 23 "Input Selection"
Selecting the vertical and horizontal aspect of the picture (i.e., the ratio of screen width and height)
→ Page E-20, 23 "Selection of Aspect Ratio (i.e., Ratio of Screen Width to Screen Height)"
1
2
3
4
5
6
7
8
9