E – 9
Names of the Main Unit Parts
Using the Storage Case
Please use the supplied storage case for storing the main unit.
The remote control pocket of the storage case will conveniently hold the remote control.
To avoid scratches to the main unit, collect the power cord and connection cables and place them in the cable pouch.
ASPECT
VIDEO
ON/POWER
S
-
VIDEOYCbCr DVI
SET
ESC
MENU
O
N
/
S
T
A
N
D
B
Y
A
S
P
E
C
T
S
O
U
R
C
E
P
O
W
E
R
/
S
T
A
T
U
S
DVI-D
COMPONENT
CTRL
S-VIDEOVIDEOY Cb Cr
Remote control pocket
Cable pouch
Attaching the Supplied Adjusters
The supplied adjusters are required for vertical adjustment of the projector.
See → Page E-19 about "Using the Adjusters"
Attention!
* Allow the main unit to cool sufficiently before placing it into the storage case. Storing the main unit soon after switching
off the main power may cause damage to it.
* Do not store in locations that will reach high or low temperatures. Doing so may adversely affect the electronic and
mechanical components and could cause damage.
* Do not place objects on top of the storage case when storing the equipment. When transporting, be careful not to bump
or cause shocks to the projector.
* Remove the batteries from the remote control when it is not going to be used for a long period.
1.Remove a rubber pad of each front foot.
Note: The rubber pads are bonded. Being carful not to mar the plastic
part of the front feet, remove the rubber pads.
2.After putting projections on the back of the supplied adjuster into
depressions of the front feet, tighten the screws.