SECTION
3.Lock top of flip back armrest by pushing height adjustment lever into the Down (vertical) position.
4.Lift up on flip back armrest to make sure the armrest is locked in place.
5.Repeat STEPS
Height |
|
| |
Adjustment | Flip Back Armrest | Locked | |
Lever | (Down - Vertical) | ||
Release Lever | |||
|
|
Flip Back
Armrest
Unlocked
(Up - Horizontal)
Front Arm Socket
FIGURE 6.2 Adjusting Flip Back Armrests
Adjusting Van Seat Armrests
Angle
WARNING
Pinch point may occur when adjusting the arm angle position.
NOTE: For this procedure, refer to Detail “A” of FIGURE 6.3 on page 47.
1.Lift up the armrest.
2.Loosen the jam nut.
3.Adjust the socket screw up or down to the desired arm angle position.
4.Tighten the jam nut.
5.To determine the same angle for the opposite armrest, count the exposed threads after the jam nut has been tightened.
6.Repeat STEPS
Height
NOTE: For this procedure, refer to Detail “B” of FIGURE 6.3 on page 47.
1.Remove the socket screw that secures the armrest to the seat frame assembly.
2.Adjust the armrest to one of four positions.
3.Reinstall the socket screw that secures the armrest to the seat frame assembly and tighten securely.
Pronto® M94™ | 46 | Part No. 1122145 |